For Super Clean Mix: Mid/Side Frequency Specific Ducking to Avoid Masking.


Mid/Side frequency specific ducking to avoid masking… for a super clean mix! - Instantiate a multi band compressor on the channel you wish to ‘duck’. 

Set the sidechain to external and select the channel you want to trigger the ducking. - Create a band to cover the overlapping frequencies. - In Pro MB set the stereo link to MID and push the slider all the way to the right. - Set the ratio relative the amount of ducking you want. - Set the threshold to only duck when masking occurs. - Tweak the attack, release and look ahead settings to work with your audio.

-----------------

Source: https://www.masteringthemix.com/

Comments

Post a Comment

Popular posts from this blog

Got a harsh Mix?

Image
Got a harsh Mix?  Simply cutting the high frequencies will affect the tonal balance of your whole mix. That might be necessary, but more often than not you only want to reduce the louder high-frequencies. For this task, a dynamic EQ is perfect. You can set the band of the high frequencies you want to reduce, then set the threshold so the reduction only happens when those high-frequencies are too loud in the mix.  ————— Source: https://www.masteringthemix.com/
Read more

Bring Guitars to life with exciters⁠

Image
Bring Guitars to life with exciters⁠ —————————⁠ Some would classify an exciter as a type of distortion effect. However, it’s more than that. An exciter adds saturation to the signal frequencies in the higher ranges (3k and up). This produces more overtones and adds richness and crispness to your mix. It enhances the sound where EQ alone can’t seem to get it.⁠ —————————⁠ Source: https://www.masteringthemix.com/
Read more

How To Make your Kick and Snares Cut Through The Mix ⁠

Image
How To Make your Kick and Snares Cut Through The Mix ⁠ ----------⁠ In a lot of the songs produced by the pros that you hear, the drums just cut through the mix. This is because they use Transient Shaping & Sidechaining to make sounds compliment each other. It is an art, and like all art, there are a few things you need to understand if you want to apply this technique in your project.⁠ ----------⁠ If you choose to use compressors for sidechaining, turn the threshold down. This is extreme but important. Next, figure out how much attack and release you need first, then readjust the threshold to taste.⁠ ----------⁠ Source: https://www.masteringthemix.com/
Read more